Touch Screen Digitizer Replacement for GIT G-Scan2 GSCAN2

This Touch Screen Digitizer fits GIT G-SCAN2 Diagnostic Tool. (NOT for G-SCAN1 or G-SCAN3 !)

If G-Scan2 touch function failed but the image on the screen is good, you can fix it with a new digitizer.

Package: Touch Screen Digitizer x1; Installation Instructions x1;

NOTE: It is a glass digitizer. NOT include a LCD Display !

The digitizer was attached to the LCD with adhesive tape, you will need to use a heat gun to heat the digitizer, remove it, then install the new digitizer to the LCD. The new digitizer comes with adhesive tape.

If you need a digitizer and LCD assembly module, you can buy it with the link below:

https://www.obd-scan-tool.com/other-parts-c-69_96/lcd-touch-screen-digitizer-replacement-for-gscan2-git-gscan2-p-1470.htm